TY - JOUR AU - Deng, G. AU - Nakanishi, T. AU - Inoue, K. PY - 2003 DA - 2003// TI - Bending load capacity enhancement using an asymmetric tooth profile JO - JSME International Journal Series C VL - 46 UR - https://doi.org/10.1299/jsmec.46.1171 DO - 10.1299/jsmec.46.1171 ID - Deng2003 ER - TY - STD TI - ISO 53:1998(E), Cylindrical gears for general and heavy engineering—standard basic rack tooth profile. ID - ref2 ER - TY - STD TI - ISO 6336-5:2003(E), Calculation of load capacity of spur and helical gears—part 5: strength and quality of materials. ID - ref3 ER - TY - JOUR AU - Kapelevich, A. PY - 2000 DA - 2000// TI - Geometry and design of involute spur gears with asymmetric teeth JO - Mechanism and Machine Theory VL - 35 UR - https://doi.org/10.1016/S0094-114X(99)00002-6 DO - 10.1016/S0094-114X(99)00002-6 ID - Kapelevich2000 ER - TY - STD TI - Kapelevich AL (2013). Direct gear design, March 22, 2013, Boca Raton: by CRC Press. ID - ref5 ER - TY - STD TI - Kapelevich, A, Shekhtman, Y. (2009). Tooth fillet profile optimization for gears with symmetric and asymmetric teeth. Geartechnology, 73-79. http://www.geartechnology.com/articles/0909/Tooth_Fillet_Profile_Optimization_for_Gears_with_Symmetric_and_Asymmetric_Teeth. UR - http://www.geartechnology.com/articles/0909/Tooth_Fillet_Profile_Optimization_for_Gears_with_Symmetric_and_Asymmetric_Teeth ID - ref6 ER - TY - STD TI - Kapelevich, L, Shekhtman, YV. (2016). Rating of asymmetric tooth gears. Power Transmission Engineering, 40-45. http://www.powertransmission.com/articles/0416/Rating_of_Asymmetric_Tooth_Gears/. UR - http://www.powertransmission.com/articles/0416/Rating_of_Asymmetric_Tooth_Gears/ ID - ref7 ER - TY - STD TI - Kruger, D, Romhild, I, Linke, H, Brechling, J, Hess, R (2013). Increasing the load capacity of gear teeth by asymmetric gear tooth design, International Conference on Gears 2013, VDI-Berichte Nr. 2199, 1327-1340. ID - ref8 ER - TY - JOUR AU - Litvin, F. L. AU - Lian, Q. AU - Kapelevich, A. L. PY - 2000 DA - 2000// TI - Asymmetric modified gear drives: reduction of noise, localization of contact, simulation of meshing and stress analysis JO - Computer Methods in Applied Mechanics and Engineering VL - 188 UR - https://doi.org/10.1016/S0045-7825(99)00161-9 DO - 10.1016/S0045-7825(99)00161-9 ID - Litvin2000 ER - TY - JOUR AU - Masuyama, T. AU - Kato, M. AU - Inoue, K. AU - Yamashita, T. PY - 2002 DA - 2002// TI - Evaluation of bending strength of carburized gears based on a quantification of defect size in the surface layer, transactions of the ASME JO - Journal of Mechanical Design VL - 124–3 UR - https://doi.org/10.1115/1.1485091 DO - 10.1115/1.1485091 ID - Masuyama2002 ER - TY - JOUR AU - Masuyama, T. AU - Mimuta, Y. AU - Inoue, K. PY - 2015 DA - 2015// TI - Bending strength simulation of asymmetric involute tooth gears JO - Journal of Advanced Mechanical Design Systems, and Manufacturing VL - 9 UR - https://doi.org/10.1299/jamdsm.2015jamdsm0071 DO - 10.1299/jamdsm.2015jamdsm0071 ID - Masuyama2015 ER - TY - STD TI - Murakami, Y (2002). Metal fatigue: effects of small defects and nonmetallic inclusions. Amsterdam: Elsevier Science Ltd. ID - ref12 ER - TY - JOUR AU - Narita, Y. AU - Yamanaka, M. AU - Kazama, T. AU - Osafune, Y. AU - Masuyama, T. PY - 2013 DA - 2013// TI - Simulation of rolling contact fatigue strength for traction drive elements JO - Journal of Advanced Mechanical Design Systems and Manufacturing VL - 7 UR - https://doi.org/10.1299/jamdsm.7.432 DO - 10.1299/jamdsm.7.432 ID - Narita2013 ER - TY - STD TI - Taniguchi, T (1992). Automatically meshing for finite element method. Tokyo: Morikita Publishing Co., Ltd., (in Japanese). ID - ref14 ER - TY - STD TI - Yamamoto, Y, Kaneta, M. (1998). Tribology. Tokyo: Riko-gakusha Publishing Co., Ltd., (in Japanese). ID - ref15 ER -