Skip to main content
Fig. 1 | International Journal of Mechanical and Materials Engineering

Fig. 1

From: Experimental investigation into the effect of surface roughness and mechanical properties of 3D-printed titanium Ti-64 ELI after heat treatment

Fig. 1

3D-printed specimens printed with a direct metal laser sintering machine (EOS M290). A 3D-printed dental implants before heat treatment. B 3D-printed dental implants after heat treatment. C 3D-printed dogbone tensile specimen after heat treatment. The heat treatment was performed for 2 h held at 800 °C in a protective argon atmosphere

Back to article page