Journal of Materials Science: Materials in Engineering

Table 3 Tensile test experimental result

From: Experimental investigation into the effect of surface roughness and mechanical properties of 3D-printed titanium Ti-64 ELI after heat treatment

	Maximum load [N]	UTS [MPa]	Yield stress [MPa]	Tensile strain [mm]
1	7630.58	968.35	882.23	2.36
2	7527.35	955.25	853.97	2.35
3	7689.41	961.18	854.88	2.34
4	7581.17	947.65	846.60	2.26
5	7520.71	940.09	852.91	2.37
Average	7589.84	954.50	858.12	2.36

Back to article page