Skip to main content
Journal of Materials Science: Materials in Engineering
Journal of Materials Science: Materials in Engineering Cover Image

Articles

Page 3 of 3

  1. It is important to investigate the mechanism for the hydrogen embrittlement of Ni-Ti alloys in acidic fluoride solutions to improve the reliability and safety of these alloys as dental devices. Therefore, the ...

    Authors: Toshio Ogawa, Eishu Yokozawa, Tetsuro Oda, Kuniaki Maruoka and Jun’ichi Sakai
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:12
    Content type: Original Article Published on:

  2. It is important to investigate the mechanism for the hydrogen embrittlement of Ni-Ti superelastic alloy in acidic fluoride solutions so that the reliability and safety of the alloy as a dental device can be im...

    Authors: Toshio Ogawa, Tetsuro Oda, Kuniaki Maruoka and Jun’ichi Sakai
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:11
    Content type: Original Article Published on:

  3. Dissimilar welding of aluminium (Al) and copper (Cu) has many applications in the electric power, electronic and piping industries. The weldments in these applications are highly valued for their corrosion res...

    Authors: Paul Kah, Cyril Vimalraj, Jukka Martikainen and Raimo Suoranta
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:10
    Content type: Review article Published on:

  4. Self-piercing riveting (SPR) is a new performing technology able to joint several kinds of metal and non-metal supports together. The combined effect of joint configuration and environmental conditions could h...

    Authors: L. Calabrese, E. Proverbio, G. Di Bella, G. Galtieri and C. Borsellino
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:9
    Content type: Original article Published on:

  5. The deformation of Al-Cu alloys is limited to an intermediate stage due to formation of ductile fracture. The present paper deals with the investigation of the effect of process parameters on the strain paths ...

    Authors: Desalegn Wogaso Wolla, M. J. Davidson and A. K. Khanra
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:8
    Content type: Original Paper Published on:

  6. In the fabrication of polymer/clay nanocomposites, the compatibilizer plays a vital role in altering the properties of nanocomposite systems. The present work primarily deals with the development of poly(methy...

    Authors: Manish Kumar, S Arun, Pradeep Upadhyaya and G Pugazhenthi
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:7
    Content type: Original article Published on:

  7. Advanced lightweight laminated composite shells are increasingly being used in modern aerospace structures to enhance their structural efficiency and performance. Such thin-walled structures are susceptible to...

    Authors: A. Shahrjerdi and B. Bahramibabamiri
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:6
    Content type: Original article Published on:

  9. Magneto-rheological (MR) damper is one of the most promising semi-active devices. The MR dampers offer a reliability of a passive system yet maintain the versatility and adaptability of the fully active contro...

    Authors: S K Mangal and Ashwani Kumar
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:4
    Content type: Original Article Published on:

  11. Laser micromachining is currently used in the MEMS production to replace the traditional etching process which consumes longer time to complete. The objective of this study is to investigate the drilling capab...

    Authors: Sivaraos Subramonian, Mohd Shahir Kasim, Mohd Amran Md Ali, Raja Izamshah Raja Abdullah and T Joseph Sahaya Anand
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:2
    Content type: Original Article Published on:

  13. Laser based flow visualization techniques are indispensable tools for flow visualization in fluid dynamics and combustion diagnostics. Among these, PLIF is very popular because of its capability to give quanti...

    Authors: Vikas M Shelar, Shrisha Rao MV, GM Hegde, G Umesh, G Jagadeesh and KPJ Reddy
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:28
    Content type: Original Article Published on:

  14. The structural integrity of welds carried out in underwater wet environment is very key to the reliability of welded structures in the offshore environment. The soundness of a weld can be predicted from the we...

    Authors: Joshua Emuejevoke Omajene, Jukka Martikainen, Huapeng Wu and Paul Kah
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:26
    Content type: Original Article Published on:

  15. The green corrosion inhibitors serve recently as a source of environmental friendly materials in the corrosive media. In present study, corrosion inhibitive performance of a new environment-friendly acrylic co...

    Authors: Hamid Reza Dinmohammadi, Ali Davoodi, Gholam Ali Farzi and Bahman Korojy
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:24
    Content type: Original Article Published on:

  16. Nanocomposites have attracted a huge amount of interest due to their improved mechanical properties, dimensional stability, thermal/chemical stability, and electrical conductivity. Nanostructures are found to ...

    Authors: Rahul Sahay, Venugopal Jayarama Reddy and Seeram Ramakrishna
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:25
    Content type: Review Article Published on:

  17. The clinching is one of the most common metal joining processes in the manufacturing of metal plate based products (similar or dissimilar, pre-coated or galvanized), especially when the assembly without adding...

    Authors: Luigi Calabrese, Edoardo Proverbio, Giovanna Galtieri and Chiara Borsellino
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:23
    Content type: Original Article Published on:

  18. Cooling of an embossed part has been recognized as one of the critical steps in the hot embossing of polymer microdevices. Numerical analysis was performed to study the stress developed in an embossed microstr...

    Authors: Juan A Gomez, Devanda Lek, In-Hyouk Song and Byoung Hee You
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:20
    Content type: Original Paper Published on:

  19. Arc behaviour is a significant factor in all arc welding processes. Understanding of arc types and their inherent properties can help enhance weld prediction and weld quality and reduce welding cost and produc...

    Authors: Paul Kah, Hamidreza Latifi, Raimo Suoranta, Jukka Martikainen and Markku Pirinen
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:15
    Content type: Review Article Published on:

  20. The present work presents an experimental characterization of the erosion-corrosion phenomena caused by confined slurry seawater flow. A set of experiments were conducted under a carefully controlled environme...

    Authors: Mohamed Shehadeh, Mohammed Anany, Khalid M Saqr and Ibrahim Hassan
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:22
    Content type: Review Article Published on:

  21. For many years, the manufacturing industry has shown interest in the opportunities offered by welding of dissimilar metals. The need for appropriate and effective techniques has increased in recent decades bec...

    Authors: Belinga Mvola, Paul Kah and Jukka Martikainen
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:21
    Content type: Review Article Published on:

  22. Equal-channel angular extrusion is a severe plastic deformation process that can be used for grain refinement to improve material properties of bulk metals. In this paper, the effect of equal-channel angular e...

    Authors: Jyhwen Wang, Huanlin Zhu, K Vadiraja Sudhakar and Angie Hill Price
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:19
    Content type: Original Paper Published on:

  23. Notched Glare 4A-3/2 laminates, comprising thin 2014-T6 aerospace aluminum alloy sheets alternately bonded with unidirectional E-glass fiber-based composite prepregs, are tested under tensile-tensile fatigue l...

    Authors: Sunil Bhat and Sockalingam Narayanan
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:3
    Content type: Original paper Published on:

  24. The constitutive behavior and failure of ductile materials are described in the present work for a general case of loading in terms of the secant moduli, which depend on the first (dilatational) and second (de...

    Authors: Nikos P Andrianopoulos and Vasileios M Manolopoulos
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:16
    Content type: Original Article Published on:

  25. Although structures made of functionally graded materials have been studied by many researchers, no research may be found in literature on boundary element analysis of the functionally graded viscoelastic stru...

    Authors: Hossein Ashrafi and Mohammad Shariyat
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:9
    Content type: Original Paper Published on:

  26. Passive cooling system has become an attractive option to design and modify homes to achieve thermal comfort. The system provides cooling through the use of passive processes, which often use heat flow paths t...

    Authors: Ahmed-Shams Forruque Ahmed, Khan-Mohammad Masud Kamal Khan, Amanullah-Amanullah Maung Than Oo and Rasul-Mohammad Golam Rasul
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:14
    Content type: Original Article Published on:

    The Erratum to this article has been published in International Journal of Mechanical and Materials Engineering 2015 10:5

  27. Nickel, one of the transition metals synthesised with chalcogenides such as Se, S and Te with possible combinations of nickel chalcogenides such as NiS2, NiSe, NiSe2 and Ni3Se2. The combination of nickel and tell...

    Authors: T Joseph Sahaya Anand, Mohd Zaidan, Mohd Asyadi Azam and Zolkepli Buang
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:18
    Content type: Original Article Published on:

  28. The principle aim of the present investigation is to study the heat transfer analysis of steady two dimensional flow of conducting dusty fluid over a stretching cylinder immersed in a porous media under the in...

    Authors: Pattasale Thippeswamy Manjunatha, Bijjanal Jayanna Gireesha and Ballajja Chandrappa Prasannakumara
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:13
    Content type: ORIGINAL ARTICLE Published on:

  29. Nanofluids are suspension of nanoparticles (less than 100 nm) in the conventional base fluids. The dispersed solid metallic or non-metallic nanoparticles change the thermal properties like thermal conductivity...

    Authors: Munish Gupta, Neeti Arora, Rajesh Kumar, Sandeep Kumar and Neeraj Dilbaghi
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:11
    Content type: Review Article Published on:

  30. Plug welding was used on the parts of the structure in which spot welding cannot be implemented, such as the complex structure and the construction with the profile stiffener. The objective of the present work...

    Authors: Triyono, Jamasri, Mochammad Noer Ilman and Raden Soekrisno
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:17
    Content type: Original Article Published on:

  32. The produced mechanical work at tensile drawing is converted into heat almost completely and the polymer temperature rises. The temperature rise at adiabatic drawing for different polymers is 20-100°C.

    Authors: Sergey Bazhenov
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:1
    Content type: Original Paper Published on:

  33. Experimental determination of properties of engineering materials is quite expensive and time consuming. Computational methods of predicting the properties of materials, such as artificial neural network (ANN)...

    Authors: Clement Uche Atuanya, Mike Rabboni Government, Chidozie Chukwuemeka Nwobi-Okoye and Okechukwu Dominic Onukwuli
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:7
    Content type: Original Article Published on:

  34. A review of various properties of ceramic-reinforced aluminium matrix composites is presented in this paper. The properties discussed include microstructural, optical, physical and mechanical behaviour of cera...

    Authors: Dipti Kanta Das, Purna Chandra Mishra, Saranjit Singh and Ratish Kumar Thakur
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:12
    Content type: Review Article Published on:

  35. This research article considers optimization of the four process parameters based on corrosion and wear of electroless Ni-P-Cu coatings. The major characteristics indexes for performance selected to evaluate t...

    Authors: Supriyo Roy and Prasanta Sahoo
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:10
    Content type: Original Article Published on:

  36. Ceramic-reinforced aluminium matrix composites have attracted considerable attention in engineering applications as a result of their relatively low costs and characteristic isotropic properties. Reinforcement...

    Authors: Dipti Kanta Das, Purna Chandra Mishra, Saranjit Singh and Swati Pattanaik
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:6
    Content type: Review Published on:

  37. The article reports a recent study on heat flux of the top heat mode closed looped oscillating heat pipe with check valves (THMCLOHP/CV). An experimental system was evaluated under normal operating conditions....

    Authors: Nipon Bhuwakietkumjohn and Thanya Parametthanuwat
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:5
    Content type: Original Paper Published on:

  38. Coupling term in coupled thermoelasticity generally is small for all materials and can be neglected. Neglecting the coupling term simplifies the analysis without noticeable effect on the frequency spectrum. In...

    Authors: Kishori Lal Verma
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:4
    Content type: Original Paper Published on:

  39. This paper reviews and integrates the latest energy-efficiency improvement techniques to recently developed superalloys and coatings for enhancing power output and profitability in today’s industrial gas turbi...

    Authors: Zainul Huda, Tuan Zaharinie and Hany A Al-Ansary
    Citation: International Journal of Mechanical and Materials Engineering 2014 9:2
    Content type: Review Published on:
Submit manuscript

COVID-19 and impact on peer review

As a result of the significant disruption that is being caused by the COVID-19 pandemic we are very aware that many researchers will have difficulty in meeting the timelines associated with our peer review process during normal times.  Please do let us know if you need additional time. Our systems will continue to remind you of the original timelines but we intend to be highly flexible at this time.

Follow

Annual Journal Metrics

Latest Tweets

Your browser needs to have JavaScript enabled to view this timeline

  • ISSN: 3004-8958 (electronic)