Skip to content

Advertisement

Articles

Sort by
Page 1 of 4
  1. Content type: Original Paper

    Applying nanofluid made by adding alumina nanoparticles to industrial oil may reduce the cutting force, friction, and cutting temperature and, from that, improve the tool life in the hobbing process. However, ...

    Authors: Minh Tuan Ngo, Vi Hoang and Sinh Vinh Hoang

    Citation: International Journal of Mechanical and Materials Engineering 2018 13:6

    Published on:

  2. Content type: Original Paper

    Measurement of the ductility like elongation and reduction of area of the fine metal wire is important because of the progress for the weight reduction and miniaturization of various products. This study estab...

    Authors: Shiori Gondo, Shinsuke Suzuki, Motoo Asakawa, Kosuke Takemoto, Kenichi Tashima and Satoshi Kajino

    Citation: International Journal of Mechanical and Materials Engineering 2018 13:5

    Published on:

  3. Content type: Original Paper

    In this paper, the heat and mass transfer of MHD nanofluid squeezing flow between two parallel plates are investigated. In squeezing flows, a material is compressed between two parallel plates and then squeeze...

    Authors: Kh. Hosseinzadeh, M. Alizadeh and D. D. Ganji

    Citation: International Journal of Mechanical and Materials Engineering 2018 13:4

    Published on:

  4. Content type: Original Paper

    Structure and properties of welded joints of low-alloy thermomechanically processed (09G2FB) and quenched and tempered shipbuilding steels (10XN2MD, 08XN3MD, and 12XN3MF), welded with manual metal arc welding ...

    Authors: Pavel Layus, Paul Kah, Elena Khlusova and Victor Orlov

    Citation: International Journal of Mechanical and Materials Engineering 2018 13:3

    Published on:

  5. Content type: Review Article

    This paper explores the impact of thermal radiation on boundary layer flow of dusty hyperbolic tangent fluid over a stretching sheet in the presence of magnetic field. The flow is generated by the action of tw...

    Authors: K. Ganesh Kumar, B. J. Gireesha and R. S. R. Gorla

    Citation: International Journal of Mechanical and Materials Engineering 2018 13:2

    Published on:

  6. Content type: Original Paper

    Metal forming has played a significant role in manufacturing development, thus investigations in the field of metal forming to improve the quality of the forming process are necessary. In the present study, th...

    Authors: Reza Bagheinia and Aazam Ghassemi

    Citation: International Journal of Mechanical and Materials Engineering 2018 13:1

    Published on:

  7. Content type: Original Paper

    Renewable energy resources are becoming more important to meet growing energy demands while reducing pollutants in the environment. In the current market, wind turbines are primarily restricted to rural use du...

    Authors: Cory Seidel, Sanjay Jayaram, Leah Kunkel and Alexander Mackowski

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:19

    Published on:

  8. Content type: Original Paper

    The present exploration deliberates the effect of nonlinear thermal radiation on double diffusive free convective boundary layer flow of a viscoelastic nanofluid over a stretching sheet. Fluid is assumed to be...

    Authors: K. Ganesh Kumar, B. J. Gireesha, S. Manjunatha and N. G. Rudraswamy

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:18

    Published on:

  9. Content type: Original Paper

    The gouging torch process using air carbon arc cutting (CAC) device is a standard maintenance procedure carrying out in high-tonne equipment used in the minery industry. The application of this process could l...

    Authors: H. Ochoa Medina, J. Leiva Yapur, O. Fornaro and Z. Cárdenas Quezada

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:16

    Published on:

  10. Content type: Original Paper

    Vanadium alloy is one of the potential candidate material for structural applications in a commercial fusion reactor. Extended survival of a structural material has a direct consequence on the net energy produ...

    Authors: Vinoadh Kumar Krishnan and Kumaran Sinnaeruvadi

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:14

    Published on:

  11. Content type: Original Paper

    One of the current problems in studying the mechanical properties and behavior of structurally inhomogeneous media with cracks is the characterization of acoustic wave propagation. This is especially important...

    Authors: Elena L. Kossovich, Alexey V. Talonov and Viktoria L. Savatorova

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:13

    Published on:

  12. Content type: Original Article

    Side-impact collisions represent the second greatest cause of fatality in motor vehicle accidents. Side-impact airbags have been installed in recent model year vehicle due to its effectiveness in reducing pass...

    Authors: D. Bendjaballah, A. Bouchoucha, M. L. Sahli and J-C. Gelin

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:12

    Published on:

  13. Content type: Original Article

    Impedance pump is a simple valveless pumping mechanism, which transports fluid through the mismatch of impedance in the system. Mismatch in impedance occurs when an asymmetrical periodic excitation is exerted ...

    Authors: V. C. C. Lee, Y. A. Abakr and K. C. Woo

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:11

    Published on:

  14. Content type: Original Article

    The purpose of the study is to investigate the effects of variable fluid properties, the velocity slip and the temperature slip on the time-dependent MHD squeezing flow of nanofluids between two parallel disks...

    Authors: K. Vajravelu, K. V. Prasad, Chiu-On Ng and Hanumesh Vaidya

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:9

    Published on:

  15. Content type: ORIGINAL ARTICLE

    The Saint-Venant problem for porous elastic cylinders is of interest both from the technical and mathematical point of view. The intended applications of solution are to mechanics of bone and to some engineeri...

    Authors: D. Ieşan

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:8

    Published on:

  16. Content type: ORIGINAL ARTICLE

    Strain and stress conditions in sheet metal shearing are of interest for calibration of various fracture criteria. Most fracture criteria are governed by effective strain and stress triaxiality.

    Authors: E. Gustafsson, S. Marth, L. Karlsson and M. Oldenburg

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:10

    Published on:

  17. Content type: Original Article

    This paper presents a numerical study of heat transfer inside the adsorber-collector of a solar adsorption refrigerator using the activated carbon AC35-methanol pair. The objective is to estimate the amount of...

    Authors: Noureddine Cherrad, Adel Benchabane, Lakhdar Sedira and Amar Rouag

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:7

    Published on:

  18. Content type: Original Article

    The austenitic stainless steel 304L is widely used as a structural material for which the finished surface has significant effect on the service performance. A study of the grinding process with regard to the ...

    Authors: Nian Zhou, Ru Lin Peng and Rachel Pettersson

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:6

    Published on:

  19. Content type: Original Article

    In rubber elastic models it is generally assumed that the bulk modulus is infinite, resulting in a material that does not change its volume and a pressure that cannot be evaluated from the material model.

    Authors: Brice N. Cassenti and Alexander Staroselsky

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:5

    Published on:

  20. Content type: Original Article

    Attractive properties of TRIP-type bainitic ferrite (TBF) steel ascribe to its unique microstructure of lath structure bainitic ferrite matrix and interlath retained austenite films. This work is concerned wit...

    Authors: Hoda Nasr El-Din, Ezzat A. Showaib, Nader Zaafarani and Hoda Refaiy

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:3

    Published on:

  21. Content type: Original Article

    The effect of β annealing on high cycle fatigue (HCF) and fatigue crack propagation (FCP) behaviors of Ti64 alloy were examined, and the results were compared to those of mill-annealed counterpart.

    Authors: Daeho Jeong, Yongnam Kwon, Masahiro Goto and Sangshik Kim

    Citation: International Journal of Mechanical and Materials Engineering 2017 12:1

    Published on:

Page 1 of 4

2016 Journal Metrics

Latest Tweets

Benefit from our free funding service

We offer a free open access support service to make it easier for you to discover and apply for article-processing charge (APC) funding.

Learn more here.

oa

Advertisement