Skip to main content

Articles

Page 2 of 3

  1. Structure and properties of welded joints of low-alloy thermomechanically processed (09G2FB) and quenched and tempered shipbuilding steels (10XN2MD, 08XN3MD, and 12XN3MF), welded with manual metal arc welding ...

    Authors: Pavel Layus, Paul Kah, Elena Khlusova and Victor Orlov
    Citation: International Journal of Mechanical and Materials Engineering 2018 13:3
  2. This paper explores the impact of thermal radiation on boundary layer flow of dusty hyperbolic tangent fluid over a stretching sheet in the presence of magnetic field. The flow is generated by the action of tw...

    Authors: K. Ganesh Kumar, B. J. Gireesha and R. S. R. Gorla
    Citation: International Journal of Mechanical and Materials Engineering 2018 13:2
  3. Metal forming has played a significant role in manufacturing development, thus investigations in the field of metal forming to improve the quality of the forming process are necessary. In the present study, th...

    Authors: Reza Bagheinia and Aazam Ghassemi
    Citation: International Journal of Mechanical and Materials Engineering 2018 13:1
  4. Renewable energy resources are becoming more important to meet growing energy demands while reducing pollutants in the environment. In the current market, wind turbines are primarily restricted to rural use du...

    Authors: Cory Seidel, Sanjay Jayaram, Leah Kunkel and Alexander Mackowski
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:19
  5. The present exploration deliberates the effect of nonlinear thermal radiation on double diffusive free convective boundary layer flow of a viscoelastic nanofluid over a stretching sheet. Fluid is assumed to be...

    Authors: K. Ganesh Kumar, B. J. Gireesha, S. Manjunatha and N. G. Rudraswamy
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:18
  6. The gouging torch process using air carbon arc cutting (CAC) device is a standard maintenance procedure carrying out in high-tonne equipment used in the minery industry. The application of this process could l...

    Authors: H. Ochoa Medina, J. Leiva Yapur, O. Fornaro and Z. Cárdenas Quezada
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:16
  7. Vanadium alloy is one of the potential candidate material for structural applications in a commercial fusion reactor. Extended survival of a structural material has a direct consequence on the net energy produ...

    Authors: Vinoadh Kumar Krishnan and Kumaran Sinnaeruvadi
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:14
  8. One of the current problems in studying the mechanical properties and behavior of structurally inhomogeneous media with cracks is the characterization of acoustic wave propagation. This is especially important...

    Authors: Elena L. Kossovich, Alexey V. Talonov and Viktoria L. Savatorova
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:13
  9. Side-impact collisions represent the second greatest cause of fatality in motor vehicle accidents. Side-impact airbags have been installed in recent model year vehicle due to its effectiveness in reducing pass...

    Authors: D. Bendjaballah, A. Bouchoucha, M. L. Sahli and J-C. Gelin
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:12
  10. Impedance pump is a simple valveless pumping mechanism, which transports fluid through the mismatch of impedance in the system. Mismatch in impedance occurs when an asymmetrical periodic excitation is exerted ...

    Authors: V. C. C. Lee, Y. A. Abakr and K. C. Woo
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:11
  11. Strain and stress conditions in sheet metal shearing are of interest for calibration of various fracture criteria. Most fracture criteria are governed by effective strain and stress triaxiality.

    Authors: E. Gustafsson, S. Marth, L. Karlsson and M. Oldenburg
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:10
  12. The purpose of the study is to investigate the effects of variable fluid properties, the velocity slip and the temperature slip on the time-dependent MHD squeezing flow of nanofluids between two parallel disks...

    Authors: K. Vajravelu, K. V. Prasad, Chiu-On Ng and Hanumesh Vaidya
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:9
  13. The Saint-Venant problem for porous elastic cylinders is of interest both from the technical and mathematical point of view. The intended applications of solution are to mechanics of bone and to some engineeri...

    Authors: D. Ieşan
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:8
  14. This paper presents a numerical study of heat transfer inside the adsorber-collector of a solar adsorption refrigerator using the activated carbon AC35-methanol pair. The objective is to estimate the amount of...

    Authors: Noureddine Cherrad, Adel Benchabane, Lakhdar Sedira and Amar Rouag
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:7
  15. The austenitic stainless steel 304L is widely used as a structural material for which the finished surface has significant effect on the service performance. A study of the grinding process with regard to the ...

    Authors: Nian Zhou, Ru Lin Peng and Rachel Pettersson
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:6
  16. In rubber elastic models it is generally assumed that the bulk modulus is infinite, resulting in a material that does not change its volume and a pressure that cannot be evaluated from the material model.

    Authors: Brice N. Cassenti and Alexander Staroselsky
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:5
  17. Attractive properties of TRIP-type bainitic ferrite (TBF) steel ascribe to its unique microstructure of lath structure bainitic ferrite matrix and interlath retained austenite films. This work is concerned wit...

    Authors: Hoda Nasr El-Din, Ezzat A. Showaib, Nader Zaafarani and Hoda Refaiy
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:3
  18. The effect of β annealing on high cycle fatigue (HCF) and fatigue crack propagation (FCP) behaviors of Ti64 alloy were examined, and the results were compared to those of mill-annealed counterpart.

    Authors: Daeho Jeong, Yongnam Kwon, Masahiro Goto and Sangshik Kim
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:1
  19. There is a shortage of experimentally determined strains during sheet metal shearing. These kinds of data are a requisite to validate shearing models and to simulate the shearing process.

    Authors: E. Gustafsson, L. Karlsson and M. Oldenburg
    Citation: International Journal of Mechanical and Materials Engineering 2016 11:14
  20. The first-order shear deformation theory (FSDT) for plates requires a shear correction factor due to the assumption of constant shear strain and shear stress across the thickness; hence, the shear correction f...

    Authors: T. C. Lim
    Citation: International Journal of Mechanical and Materials Engineering 2016 11:13
  21. Friction stir processing (FSP) is a solid-state processing method, which recently gained wide popularity to modify the microstructure of metallic surfaces and to produce surface composites. For the past decade...

    Authors: Ratna Sunil B.
    Citation: International Journal of Mechanical and Materials Engineering 2016 11:12
  22. An ISO standard tooth profile has a symmetric pressure angle of 20°. However, the load capacity can be increased with respect to bending and contact pressure by increasing the pressure angle on the meshing sid...

    Authors: Tomoya Masuyama and Naoki Miyazaki
    Citation: International Journal of Mechanical and Materials Engineering 2016 11:11
  23. Shearing is a fast and inexpensive method to cut sheet metal that has been used since the beginning of the industrialism. Consequently, published experimental studies of shearing can be found from over a centu...

    Authors: E. Gustafsson, L. Karlsson and M. Oldenburg
    Citation: International Journal of Mechanical and Materials Engineering 2016 11:10
  24. Turbulent forced convection and heat transfer structure in the spirally semicircle-grooved tube heat exchanger are numerically examined. The computational problem is solved by finite volume method (FVM) with t...

    Authors: Pitak Promthaisong, Amnart Boonloi and Withada Jedsadaratanachai
    Citation: International Journal of Mechanical and Materials Engineering 2016 11:9
  25. This paper optimizes the crushing response and energy absorption of functionally graded thickness (FGT) inversion tubes using the multi-objective optimization method. The numerical results, which are validated...

    Authors: Omid Mohammadiha and Hashem Ghariblu
    Citation: International Journal of Mechanical and Materials Engineering 2016 11:8
  26. This paper reports the effect of process parameters on material removal rate (MRR) and surface roughness (Ra) in wire electro discharge machining of AISI D2 steel.

    Authors: M. Manjaiah, Rudolph F. Laubscher, Anil Kumar and S. Basavarajappa
    Citation: International Journal of Mechanical and Materials Engineering 2016 11:7
  27. Heat exchanger is a device in many industrial applications and energy conversion systems. Various heat exchangers are designed for different industrial processes and applications. Shell and tube heat exchanger...

    Authors: J. Bala Bhaskara Rao and V. Ramachandra Raju
    Citation: International Journal of Mechanical and Materials Engineering 2016 11:6
  28. AA2519-T87 is a new armour grade aluminium alloy employed in the fabrication of light combat military vehicles. Joining of this material using fusion welding processes, results in the formation of solidificati...

    Authors: S. Sree Sabari, S. Malarvizhi and V. Balasubramanian
    Citation: International Journal of Mechanical and Materials Engineering 2016 11:5
  29. The paper presents a study of E500 TMCP European and F500W Russian Arctic shipbuilding thick steel plates. E500 steel plate (thermo-mechanically controlled process (TMCP), 25 mm thickness) and F500W steel plat...

    Authors: Pavel Layus, Paul Kah, Vladislav Ryabov and Jukka Martikainen
    Citation: International Journal of Mechanical and Materials Engineering 2016 11:4
  30. The goal of the study is to understand the potential energy absorption benefits ofcomponents fabricated using fused deposition modeling additive manufacturing under high strain rateloading.

    Authors: Gbadebo Owolabi, Alex Peterson, Ed Habtour, Jaret Riddick, Michael Coatney, Adewale Olasumboye and Denzell Bolling
    Citation: International Journal of Mechanical and Materials Engineering 2016 11:3
  31. Growing demand for materials suitable for Arctic marine constructions necessitates the development of lowcost steels with excellent low-temperature properties. One way of addressing this issue is to obtain a f...

    Authors: Pavel Layus, Paul Kah, Alexander Zisman, Markku Pirinen and Sergey Golosienko
    Citation: International Journal of Mechanical and Materials Engineering 2016 11:2
  32. The objective of the present study is to analyse the steady second-order slip flow and heat transfer of an incompressible viscous water-based nanofluid over a stretching/shrinking sheet both analytically and n...

    Authors: M. M. Rashidi, A. K. Abdul Hakeem, N. Vishnu Ganesh, B. Ganga, M. Sheikholeslami and E. Momoniat
    Citation: International Journal of Mechanical and Materials Engineering 2016 11:1
  33. Transportation industries are obliged to address concerns arising from greater emphasis on energy saving and ecologically sustainable products. Engineers, therefore, have a responsibility to deliver innovative...

    Authors: Paul Kah, Richard Rajan, Jukka Martikainen and Raimo Suoranta
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:26
  34. Super 304H austenitic stainless steel tubes containing 2.3 to 3 (wt.%) of Cu are mainly used in superheaters and reheaters of ultra super critical boilers due their excellent corrosion and oxidation resistance...

    Authors: M. Vinoth Kumar, V. Balasubramanian and A. Gourav Rao
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:25
  35. The effect of the holding time of the deep cryogenic treatment on the strain hardening of HY-TUF, a low-alloy medium-carbon steel, and a comparison with strain hardening of conventional heat-treated steel were...

    Authors: Ahmad Zare, H. Mansouri and S. R. Hosseini
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:24
  36. Ultrasonic waves have been used as a nondestructive testing tool to evaluate defects in steel mill products. Although an ultrasonic wave has the capability to detect defects, the type classification of defects...

    Authors: Asriana Ibrahim, Aisyah Zabri and Kazuyuki Nakahata
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:23
  37. High strength low carbon steels used in the automobile industry are often annealed at the intercritical temperature, and recrystallization of ferrite and formation of austenite can occur at the same time durin...

    Authors: Toshio Ogawa
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:22
  38. During the past decade, many researchers have focused on the vibration characteristics of stationary and rotating functionally graded beams employing various methods of analysis. Hitherto, the studies have bee...

    Authors: N. V. Ramesh Maganti and Mohan Rao Nalluri
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:21
  39. Recently, some researchers have simulated FSW using FEM and studied the influence of process parameters and tool geometry on material flow, welding force, and temperature and strain distributions during fricti...

    Authors: Parviz Asadi, Mohammad Kazem Besharati Givi and Mostafa Akbari
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:20
  40. Present study investigates the effect of adding nanoclay particles and foaming conditions on cellular properties of ABS/Nanoclay nanocomposite foams.

    Authors: Bashar Azerag, Taher Azdast, Ali Doniavi, Sajjad Mamaghani Shishavan and Richard Eungkee Lee
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:19
  41. In this study, the effect of processing parameters on the mechanical properties of friction-stir-welded polyamide (nylon 66) sheets is investigated.

    Authors: Imad M. Husain, Raed K. Salim, Taher Azdast, Soran Hasanifard, Sajjad M. Shishavan and Richard Eungkee Lee
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:18
  42. The environment-induced cracking (EIC) of as-annealed Ni3(Si,Ti) and Ni3(Si,Ti) with 2Mo has been researched as functions of applied stress, chloride ion concentration, test temperature, and pH.

    Authors: Gadang Priyotomo, Sanat Wagle, Kenji Okitsu, Akihiro Iwase, Yasuyuki Kaneno, Rokuro Nishimura and Takayuki Takasugi
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:17
  43. In high speed milling of the dies and molds characterized by large-scale and deep cavities with the lengthened shrink-fit holder (LSFH), the machining error caused by the tool deflection is not allowed to be i...

    Authors: Zhou Houming, Liu Bo, Zhou Youhang and Peng Ruitao
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:15
  44. Foldcore is an origami-like structural sandwich core which is manufactured by folding a planar base material into a three dimensional structure. The manufacturing technology is open to a variety of base materi...

    Authors: Sebastian Fischer
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:14
  45. Technical innovations in robotic welding and greater availability of sensor-based control features have enabled manual welding processes in harsh work environments with excessive heat and fumes to be replaced ...

    Authors: P Kah, M Shrestha, E Hiltunen and J Martikainen
    Citation: International Journal of Mechanical and Materials Engineering 2015 10:13

COVID-19 and impact on peer review

As a result of the significant disruption that is being caused by the COVID-19 pandemic we are very aware that many researchers will have difficulty in meeting the timelines associated with our peer review process during normal times.  Please do let us know if you need additional time. Our systems will continue to remind you of the original timelines but we intend to be highly flexible at this time.

Annual Journal Metrics

Latest Tweets

Your browser needs to have JavaScript enabled to view this timeline